Model 59 Oil Seal, MILL-RIGHT ES, CRS, 10.500 in Shaft, 11.500 in Bore, 0.500 in Width

24715-1727
Model 59 Oil Seal, MILL-RIGHT ES, CRS, 10.500 in Shaft, 11.500 in Bore, 0.500 in Width
  • Shipping Weight: 1.08 lbs
  • Style/Model: Model 59
  • Shaft Size (inch): 10.500
  • Shaft Size (mm): 266.70
  • Bore Size (inch): 11.500
  • Bore Size (mm): 292.10
  • Width (inch): 0.500
  • Width (mm): 12.70
  • Lip Material: MILL-RIGHT ES
  • Split or Solid: Solid
  • Case Material: CRS
  • Configuration Type (Seals): Single Lip
  • Lip Base Material Abbreviation: HNBR
  • Lip Base Material Name: Hydrogenated Nitrile
  • Max Temperature (C): 150
  • Max Temperature (F): 300
  • Misalignment Tolerance (inch): 0.045 in @ 2,500 ft/min; 0.023 in @ 5,000 ft/min
  • Misalignment Tolerance (mm): 1.18 mm @12.7 m/s; 0.59mm @ 25.4 m/s
  • Spacers Exist: No
  • Spring Material: 302SS
  • Standard/Special: Standard
  • UPC Code: 717744177836
  • Pressure Max (bar): 0.48
  • Pressure Max (psi): 7
  • Primary Dimensional Unit of Measure: Imperial
  • Max Shaft Surface Speed (meter/sec): 25.4
  • Max Shaft Surface Speed (feet/min): 5,000
Garlock's KLOZURE® Model 59 Oil Seal with a MILL-RIGHT® ES lip offers up to 93% improvement in abrasion resistance and greater temperature resistance than standard nitrile seals translating to higher equipment efficiencies, longer bearing life, increased production, and less maintenance.\n\nThis seal is a great bearing protection option for high-speed rotary applications with severe shaft misalignment or in applications with frequent chock removal and installation. The reverse bevel sealing lip prevents lip rollover seen in common lip designs, reducing leaks from installation error. Unlike bonded seals where the rubber to metal bond can fail, resulting in leaks and lack of bearing protection, the Model 59 seal performance is assured with our assembled combination of a sealing element, heavy duty metal case, adapter ring, and a molded in finger spring.\n\nFor optimal performance requiring greater misalignment consider KLOZURE® Model 64. For applications requiring minimal misalignment, consider KLOZURE® Model 53.\n\nFor improved chemical resistance or performance with higher temperatures and similar abrasion resistance, upgrade to a MILL-RIGHT® V lip.
  • Overview

Features and Benefits:

  • MILL-RIGHT® sealing elements generate less heat, lower power consumption, improve chemical resistance and extend service life
  • Easy and fast installation without lip roll over
  • Ensure a secure shaft seal with our stainless steel finger spring, bonded and mechanically retained to prevent bearing damage from spring dumping and corrosion
  • Heavy duty metal case provides maximum bore retention
  • Wear resistant and low friction

Typical Applications:

  • Common industry sealing problems

Media Use:

  • Grease
  • Oil

Industries Served:

  • Primary Metals
  • Mining
  • Pulp and Paper
  • Oil and Gas