Technical Articles
Browse Garlock's collection of Technical Articles featured in industry publications and spanning a wide variety of topics.
- Bridging the Gap with Case Studies and Real-World Results
- Determining Low-Temperature Ratings for Rubber Seals
- Streamlining Quality Assurance
- The Capabilities of Expansion Joints
- Performance Expansion Joints: More Than Meets the Eye
- Avoid Premature Bearing Wear with Long-Term Sealing Solutions
- Addressing Premature Failure in Elastomeric Gaskets
- Addressing Sealing Challenges in Rotating Equipment for the Food and Pharmaceutical Industries
- Small Components Make a Big Difference: The Sealing Systems of Pulp & Paper Mills
- Mechanical Seals and Bearing Isolator Solutions for Tidal Energy Equipment Protection
- Next Level PTFE Performance for Sanitary Applications
- Raising the Gasket Profile in Aging Systems
- New Gasket Tackles Tough Tasks
- What do Chemical Processors Want in a PTFE Gasket?
- Custom Rubber Expansion Joints
- Back to Basics: Expansion Joints
- A User’s Guide to Expansion Joint Control Units
- How to Investigate Compression Packing Failure Modes by Chris Boss
- Enhanced Surface Profiles for Gaskets
- How to Get Most Out of Flange Gasket Materials
- Handle Abrasive Chemicals with the Right Pump Diaphragm
- Compliance with Relevant FDA Standards Key to Proper Selection of Sealing Gaskets
- Improper Gasketed Joints Can Be Deadly
- Advanced Gasket Formulation Helps Refrigerant Systems Keep Their Cool
- Using Design Analysis to Prevent Failure of Wear Bands in Rotating Equipment – Part 1
- Sealing, Connecting, Protecting Global Pipelines
- Carefully Choose Gasket Material
- Advanced PTFE gaskets for demanding applications
- How to Troubleshoot a Gasket Leak
- LDAR Programs Continue to Evolve
- Sealing tank car manways to prevent NARs
- How to Strategically Approach New Product Development
- Evolutionary Step
- Helping China Breathe A Little Easier
- Emissions: Plants Plug Away at Leaks
- Emissions Regulations and Control
- Getting the Most Out of PTFE Diaphragms: (2 of 2)
- How to Interpret Published Sealing Data
- Getting the Most Out of PTFE Diaphragms (1 of 2)
- Gaskets Designed to Take the Heat
- Bearing Isolator Seals - an ideal way to reduce TLC and MTTR costs
- How Pumping Systems Design Affects Sealing Performance
- Why Pharma Companies Require Sealing Suppliers to be ISO Certified
- Diligence Is the Key to Safe Sealing
- EPA Enforcement: 'Next-Generation Compliance'
- Preventing Failure of Elastomeric Expansion Joints in FGD Systems
- Sterilizing Valve Diaphragms without Damaging Them
- Initial gasket compression is key to safe, reliable flange joints
- Sealing the Deal: Qualifying Sealing Materials for Potable Water Systems
- Focus on Seals and Gaskets
- Sheila Kennedy says seal manufacturers are working to improve energy efficiency, leak protection, service
- Pump Packing for Abrasive Materials
- Buckle Vision
- CMO to CIO Technical Article
- Global Trends in Enhanced Leak Detection and Repair
- Troubleshooting your piping integrity takes a joint effort
- New Envirionmental Material Derived from Fly Ash and HDPE
- Product Design and Development Article, Sept 2012 - What's that Noise?
- Misunderstood Marketing
- How To Seal Molten Salts In Concentrated Solar Plants
- Why Some Flange Isolation Kits Fail
- The "One Thing" Management Approach
- Lips or Isolators?
- Preventing Failures by Selecting the Right Flange Isolation Kit
- EnPro Industries named as one of America's Safest Companies
- Marine Exhaust Systems: Special Sealing Challenges
- Seal Makers Plug Away
- Hybrid Sealing Technology for Flooded Applications
- How do I prevent galvanic corrosion in my packing gland?
- Sealing Fuel Cells for Peak Performance
- Maintaining Integrity: Effects of SIP Sterilization on PTFE Diaphragms
- Recycling and Energy Efficiency Protect the Environment and Boost the Bottom Line
- Expansion Joints Dampen Harmful Vibration in Emergency Diesel Generators
- Control Leaks with Bearing Isolators
- What are the most important considerations before and after ordering a non-metallic expansion joint?
- Sealing Pipeline Penetrations
- How do I choose a gasket for an FDA application?
- 13 Common Questions Regarding Rotating Shaft Seals