ONE-UP® EPDM Pump Diaphragm for 1/2" ALMATEC A15, AD15, AD20, CX50, F20, B20BN, E15E, E15T, CX50E, AD20, ET25; 1/2" DELLMECO DM15,DM20; 1/2" TAPFLO T50, T70; 1/2" WILDEN UA.050, UH.050, UH.075; 1/2" VERDER VA-P15, VDP-D15, VDP-D20

PA0148
ONE-UP® EPDM Pump Diaphragm for 1/2" ALMATEC A15, AD15, AD20, CX50, F20, B20BN, E15E, E15T, CX50E, AD20, ET25; 1/2" DELLMECO DM15,DM20; 1/2" TAPFLO T50, T70; 1/2" WILDEN UA.050, UH.050, UH.075; 1/2" VERDER VA-P15, VDP-D15, VDP-D20
  • Shipping Weight: 0.424 lbs
  • Style/Model: Garlock ONE-UP
  • Air Side Material: EPDM
  • Application/Equipment: ALMATEC A15 1/2", ALMATEC AD15 1/2", ALMATEC AD20 1/2", ALMATEC B20BN 1/2", ALMATEC CX50 1/2", ALMATEC CX50E 1/2", ALMATEC E15E 1/2", ALMATEC E15T 1/2", ALMATEC ET25 1/2", ALMATEC F20 1/2", DELLMECO DM15 1/2", DELLMECO DM20 1/2", TAPFLO T50 1/2", TAPFLO T70 1/2", VERDER VA-P15 1/2", VERDER VDP-D15 1/2", VERDER VDP-D20 1/2", WILDEN UA.050 1/2", WILDEN UH.050 1/2", WILDEN UH.075 1/2"
  • Abrasive Resistant: Yes
  • Bolt Circle Diameter (Inch): 5.220
  • Bolt Circle Diameter (mm): 132.59
  • Bolt Hole Diameter (Inch): 0.240
  • Bolt Hole Diameter (mm): 6.10
  • Bolt Hole Quantity: 6
  • Center Hole: No
  • Compliances: RoHS Compliant
  • Compliances/Standards: RoHS Compliant
  • Connection Type: Female
  • Form: Molded
  • Integral Piston Diaphragm: Yes
  • Max Temperature (C): 138
  • Max Temperature (F): 280
  • Media Side Material: PTFE
  • Outside Diameter (inch): 5.660
  • Outside Diameter (mm): 143.76
  • Outside Shape: Round
  • Sealing Design: Flange/Bolt
  • Thread Length: 10.41
  • Thread Type: M10x1.5mm
  • ThreadLength: 0.410
  • UPC Code: 191074199216
  • Primary Dimensional Unit of Measure: Imperial

Garlock ONE-UP® pump diaphragms make use of high performance GORE® ePTFE sheet on the wetted side for significantly longer life than conventional PTFE diaphragms. Aside from the vastly superior PTFE, additional strength is given to the diaphragms by utilizing a one piece construction where the ePTFE is physically bonded to a premium grade, fabric reinforced, elastomer backer. The ePTFE facing and elastomer backer both have patented surface features that help disperse stress and is another contributing factor to the diaphragms renown longevity. Garlock ONE-UP® diaphragms excel in applications that experience chemically aggressive process medias, abrasive wear, high pressures, and other pumping system obstacles that are often too extreme for stock OEM diaphragms. GORE is a registered trademark of W.L. Gore & Associates.

  • Overview

Features and Benefits:

  • Contains GORE® ePTFE sheet bonded to a fabric reinforced rubber backing for extraordinary strength and cycle life increase that is magnitudes higher than competitive diaphragms.
  • One piece design with patented rib construction greatly increases flex life while inversely decreasing down time and maintenance costs.
  • Chemically inert materials are ideal for use in any application spanning from low pH acids to high pH caustics.
  • Available for most AODD makes and models allowing for ease of transition from low end stock diaphragms.

Typical Applications:

  • High abrasive content
  • Chemically aggressive media
  • Solids and highly viscous fluids

Media Use:

  • Acids and caustics
  • Abrasive slurries
  • Paint and coatings
  • Oil and gas

Equipment Compatibility:

1/2" ALMATEC A15, AD15, AD20, CX50, F20, B20BN, E15E, E15T, CX50E, AD20, ET25; 1/2" DELLMECO DM15,DM20; 1/2" TAPFLO T50, T70; 1/2" WILDEN UA.050, UH.050, UH.075; 1/2" VERDER VA-P15, VDP-D15, VDP-D20

Industries Served:

  • Mining
  • Chemical Processing
  • Oil and Gas
  • Power Generation