GYLON® STRESS SAVER® Style 3504 Full Face Gasket, PTFE with Aluminosilicate Microspheres, 1 1/2 Inch ASME B16.5 Class 150, 0.125 Inch Thick, 4 Bolt Holes

37035-5193
  • Compliances/Standards: ADI/TSE Free, FDA Compliant, REACH Compliant, RoHS Compliant, USP VI 661 Compliant, USP VI 87 Compliant, USP VI 88 Compliant
  • Shipping Weight: 0.126 lbs
  • Gasket Type: Full Face
  • Style/Model: Style 3504
  • Pipe Standard and Class: ASME B16.5 Class 150
  • Nominal Pipe Size Fraction (Inch): 1 1/2
  • Thickness (inch): 0.125
  • Composition: PTFE with Aluminosilicate Microspheres
  • Temperature Range (F): -450°F - 500°F
  • Temperature Range (C): -268°C - 260°C
  • Pressure Max (psi): 800
  • Pressure Max (bar): 55
  • Bolt Circle Diameter (Inch): 3.875
  • Bolt Circle Diameter (mm): 98.43
  • Bolt Hole Diameter (Inch): 0.625
  • Bolt Hole Diameter (mm): 15.88
  • Bolt Hole Quantity: 4
  • Branding: Unbranded
  • Compliances: FDA Compliant, REACH Compliant, RoHS Compliant, USP VI 87 Compliant, USP VI 88 Compliant, USP VI 661 Compliant, ADI/TSE Free
  • Flange Standards/Pressure Class: ASME B16.5 Class 150
  • Inside Diameter (Inch): 1.890
  • Inside Diameter (mm): 48.01
  • Material: GYLON Style 3504
  • Material Abbreviation: PTFE
  • Min Temperature (C): -268
  • Min Temperature (F): -450
  • Nominal Pipe Size (inch): 1.500
  • Nominal Pipe Size DN (mm): 40.0
  • Outside Diameter (inch): 5.000
  • Outside Diameter (mm): 127.00
  • Pressure Class: 150
  • Primary Nominal Thickness: 1/8 in
  • UPC Code: 191074151580
  • Primary Dimensional Unit of Measure: Imperial
  • Color: Blue
  • Thickness (mm): 3.18

STRESS SAVER® GYLON® Style 3504 combines the proven sealing advantages of molded, raised ribs with the performance characteristics of the industry recognized GYLON® 3504 PTFE gasketing material. The combination of these two time-tested configurations make STRESS SAVER® GYLON® Style 3504 the ultimate sealing solution.

  • Overview

Features and Benefits:

  • Versatility - Suitable for both metallic and non-metallic piping with either flat or raised face flanges
  • Chemical resistance – GYLON® 3504 is ideal for a wide range of caustics and acids, helping to simplify the selection process
  • Limited Creep and Cold-Flow – Greatly reduces the leakage after installation and system cycling
  • Superior Physical Properties – Higher temperature and pressure capabilities as compared to rubber gaskets
  • Homogeneous Construction – Single piece design helps avoid permeation, delamination, fold-over of PTFE envelopes and potential splitting when installed against raised face flanges
  • High purity – FDA, USP Class VI, and NSF-61*