RISER-WRAP®, 11.000 Inch Wide Strip, Visco-Elastic Adhesive and Heat Shrink two-layer, 6.000 Inch Long
RISER-WRAP STRIP-11
- Shipping Weight: 0 lbs
- Length (inch): 6.000
- Length (mm): 152.40
- Material: Visco-Elastic Adhesive and Heat Shrink two-layer
- Max Temperature (C): 204
- Max Temperature (F): 400
- UPC Code: 191074775168
- Width (inch): 11.000
- Width (mm): 279.40
- Primary Dimensional Unit of Measure: Imperial
- Thickness (inch): 0.098
- Thickness (mm): 2.49
Riser-Wrap® is a two-layer protective pipe wrap consisting of an adhesive liquid covered by a heat shrink sleeve.
The Riser-Wrap® seal is a two-layer system designed for corrosion and sealing protection on pipelines and encapsulating manholes to seal joints against ground water infiltration. The first layer is a viscoelastic adhesive liquid sealant covered by a heat shrink sleeve. The sleeve is a thick-walled (2.5mm), cross-linked, high density polyethylene membrane.
- Overview
Features and Benefits:
- Preheat required only to remove the moisture from the surface and for fast/easy installation.
- Permanent heat indicator ensures that the correct application of heat has been applied to the entire heat shrink sleeve.
- Installation is fully inspectable at any time after the installation.
- Accommodates ground movement.
- Toughness to resist soil stress.
- Optimizes flow and fill of visco-elastic adhesive sealant.
- Seals against ground water infiltration. Impermeable.
- Extends structure life. No special tools.
- Quick & easy installation.
- Available in 17”, 11” and 5.5” widths x 50 ft rolls; online sizing program available.
Typical Applications:
- Manhole Encapsulation/Sealing
- Pipelines
- Repair and Rehabilitation
- Step-Down Joints
- Square/Rectangular Vaults
- Septic Tanks/Vaults