RISER-WRAP®, 5.500 Inch Wide Strip, Visco-Elastic Adhesive and Heat Shrink two-layer, 6.000 Inch Long

RISER-WRAP STRIP-5.5
  • Shipping Weight: 0 lbs
  • Length (inch): 6.000
  • Length (mm): 152.40
  • Material: Visco-Elastic Adhesive and Heat Shrink two-layer
  • Max Temperature (C): 204
  • Max Temperature (F): 400
  • UPC Code: 191074775182
  • Width (inch): 5.500
  • Width (mm): 139.70
  • Primary Dimensional Unit of Measure: Imperial
  • Thickness (inch): 0.098
  • Thickness (mm): 2.49

Riser-Wrap® is a two-layer protective pipe wrap consisting of an adhesive liquid covered by a heat shrink sleeve.

The Riser-Wrap® seal is a two-layer system designed for corrosion and sealing protection on pipelines and encapsulating manholes to seal joints against ground water infiltration. The first layer is a viscoelastic adhesive liquid sealant covered by a heat shrink sleeve. The sleeve is a thick-walled (2.5mm), cross-linked, high density polyethylene membrane.

  • Overview

Features and Benefits:

  • Preheat required only to remove the moisture from the surface and for fast/easy installation.
  • Permanent heat indicator ensures that the correct application of heat has been applied to the entire heat shrink sleeve.
  • Installation is fully inspectable at any time after the installation.
  • Accommodates ground movement.
  • Toughness to resist soil stress.
  • Optimizes flow and fill of visco-elastic adhesive sealant.
  • Seals against ground water infiltration. Impermeable.
  • Extends structure life. No special tools.
  • Quick & easy installation.
  • Available in 17”, 11” and 5.5” widths x 50 ft rolls; online sizing program available.

Typical Applications:

  • Manhole Encapsulation/Sealing
  • Pipelines
  • Repair and Rehabilitation
  • Step-Down Joints
  • Square/Rectangular Vaults
  • Septic Tanks/Vaults